Fujitsu fi-5950 Operator's Manual page 15

Do not use any aerosol sprays or alcohol based sprays to clean the scanner. Dust blown
up by strong air from the spray may enter the inside of the scanner. This may cause the
scanner to fail or malfunction. Sparks, caused by static electricity, generated when
blowing off dust and dirt from the outside of the scanner may cause a fire.
Check the following items once a month:
•The power cable is firmly inserted into the AC outlet.
•The power cable is not emitting abnormal heat, or the power cable is not rusted or bent.
•Dust is not accumulated on the power cable. If so, wipe off any dust with a soft, dry
cloth.
•The power cable does not have any cracks or scratches.
If any abnormality is detected, contact your FUJITSU scanner dealer or an authorized
FUJITSU scanner service provider.
Make sure to ground to avoid electric shock. Be sure to ground before plugging into the
AC outlet. Unplug from the outlet before removing the ground connection.
CAUTION
The following describes important cautions described in this manual.
When installing the scanner on a table, make sure that the table is flat and level. Place
the scanner so that none of its parts extend beyond the edge of the table, otherwise it
may fall or collapse and cause injuries.
Install the scanner away from strong magnetic fields and other sources of electronic
noise. Protect the scanner against any static electricity and choose a static-free place to
install the scanner.
Static electricity can cause the scanner to malfunction.
xiii