Fujitsu fi-5950 Operator's Manual page 13

Do not install the scanner in the following locations which are subject to high
temperature, humidity, less ventilation, or dust. If placed in an area subject to high
temperature, the cover may become overheated and deformed, causing the scanner to
become hot, resulting in a fire.
•A place near heat-radiating devices such as stoves or electric heaters, or flammable
items such as volatile inflammable materials or curtain.
•A place such as a bathroom, shower room, or swimming pool where it may easily get
wet.
•A place under direct sunlight, in a car under the scorching sun, or near heating
apparatus where it may get hot.
To avoid injuries, do not place the scanner in an area where small children may be able to
reach.
Before moving the scanner, be sure to disconnect the power cable from the AC outlet,
and all other interface cables. Make sure that the floor is free of any obstructions.
Do not move the scanner with the power and interface cables connected as this can
damage the cables, which can later cause a fire, electric shock as well as injuries.
Do not touch the power cable with wet hands. Doing so might cause an electric shock.
When removing the power cable from the AC outlet, make sure to hold the power plug
and not the cable. Pulling the power cable may damage it, which may cause a fire or
electric shock.
xi