Clemco ZERO BNP-220S Manual

Clemco ZERO BNP-220S Manual

Suction blast cabinet

Advertisement

© 2016 CLEMCO INDUSTRIES CORP.
One Cable Car Dr.
Washington, MO 63090
Phone (636) 239-4300
Fax (800) 726-7559
Email: info@clemcoindustries.com
www.clemcoindustries.com
BNP 65 and BNP 220
Suction Blast Cabinets
DATE OF ISSUE: 11/94
REVISION:
NOTICE TO PURCHASERS AND USERS OF OUR PRODUCTS
AND THIS INFORMATIONAL MATERIAL
Clemco proudly provides products for the abrasive blast industry
and is confident that industry professionals will use their knowledge
and expertise for the safe and efficient use of these products.
The products described in this material, and the information
relating to these products, are intended for knowledgeable,
experienced users. It is the responsibility of the user to insure that
proper training of operators has been performed and a safe work
environment is provided.
No representation is intended or made as to: the suitability of the
products described here for any purpose or application, or to the
efficiency, production rate, or useful life of these products. All
estimates regarding production rates or finishes are the responsibility
of the user and must be derived solely from the user's experience
and expertise, not from information contained in this material.
It is possible that the products described in this material may be
combined with other products by the user for purposes determined
solely by the user. No representations are intended or made as to the
suitability of or engineering balance of or compliance with regulations
or standard practice of any such combination of products or
components the user may employ.
This equipment is only one component of a cabinet blasting
operation. Other products, such as air compressors, air filters and
receivers, abrasives, equipment for ventilating, dehumidifying, or
other equipment, even if offered by Clemco, may have been
manufactured or supplied by others. The information Clemco
provides is intended to support the products Clemco manufactures.
Users must contact each manufacturer and supplier of products used
in the blast operation for warnings, information, training, and
instruction relating to the proper and safe use of their equipment.
O. M. 21309
I, 06/16

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ZERO BNP-220S and is the answer not in the manual?

Questions and answers

Summarization of Contents

1.0 INTRODUCTION
1.1 Scope of Manual
Defines the manual's coverage of setup, operation, maintenance, and parts for BNP 65/220 cabinets.
1.3 General Description
Describes the BNP blast cabinets and their main components: enclosure, reclaimer, and dust collector.
Safety Symbols
Safety Alert Definitions
Explains the meaning of safety alert symbols like WARNING, DANGER, NOTICE, and CAUTION.
2.0 INSTALLATION
2.1 General Installation Notes
Covers cabinet placement, access, and component positioning for installation.
2.3 Connect Compressed Air Supply Line(s)
Instructions for connecting the compressed air supply with safety warnings.
2.5 Connect Electrical Service
2.5.1 Single-phase wiring
Specific wiring instructions for 115-volt single-phase power connections.
3.0 FIELD INSTALLED ACCESSORIES
3.2 Curtain Installation
Step-by-step guide for installing protective rubber curtains in the cabinet.
3.4 Armrest
Instructions for assembling and mounting the armrest for ergonomic models.
4.0 OPERATION
4.1 Media Loading and Unloading
Procedures for adding and removing abrasive media from the reclaimer.
5.0 ADJUSTMENTS
5.1 Blasting Pressure
How to set and adjust the blast pressure regulator for different applications.
5.2 Air Jet Adjustment
Instructions for adjusting the air jet for proper media flow and suction.
6.0 PREVENTIVE MAINTENANCE
6.1 Daily Maintenance
Daily checks and tasks to ensure proper cabinet function and cleanliness.
7.0 SERVICE MAINTENANCE
7.1 Gloves
Procedures for inspecting, changing, and maintaining operator gloves.
8.0 TROUBLESHOOTING
8.1 Poor visibility
Identifies causes and solutions for reduced visibility during blasting.
9.0 ACCESSORIES AND REPLACEMENT PARTS
9.1 Optional Accessories
Details various optional accessories to enhance cabinet functionality.

Table of Contents