Table of Contents
Advertisement
Quick Links
Portable Submersible Pump
IMPORTANT!
Read all instructions in this manual before operating pump.
As a result of Crane Pumps & Systems, Inc., constant product improvement program,
product changes may occur. As such Crane Pumps & Systems reserves the right to
change product without prior written notifi cation.
A Crane Co. Company
420 Third Street
Piqua, Ohio 45356
Phone: (937) 778-8947
Fax: (937) 773-7157
www.cranepumps.com
Manual Index
INSTALLATION MANUAL
83 West Drive, Bramton
Ontario, Canada L6T 2J6
Phone: (905) 457-6223
Fax: (905) 457-2650
70 Series
0.7 HP, 120 Volt
0.7 HP, 240 Volt
125 Series
1.25 HP, 120 Volt
1.25 HP, 240 Volt
Form No. 115150-Rev. J
Advertisement
Table of Contents
Related Manuals for Barnes 125 Series
Summarization of Contents
SAFETY FIRST!
General Safety Warnings
Summarizes important, caution, and warning types for hazard recognition.
Specific Hazard Symbols
Details specific hazards like fluids, biohazards, voltage, and extreme heat.
Operational Safety Precautions
Instructions on clothing, fingers, lifting, power cords, and equipment security.
PUMP SPECIFICATIONS
Key Specifications and Models
Lists discharge, liquid temperature, materials, and model-specific data.
Important Operational Notes
Details on dry operation and installation requirements for pump longevity.
SECTION B: GENERAL INFORMATION
Purchaser Information
Congratulates the purchaser and outlines the manual's purpose.
Receiving and Storage
Guidance on checking for damage upon delivery and proper storage methods.
Service Centers
Contact information for authorized service centers and departments.
SECTION C: INSTALLATION
Location and Application
Recommended uses and pre-pump fluid checks for various applications.
Discharge and Liquid Level Controls
Guidance on discharge setup and instructions for float switch installation.
Electrical Connections
Details on wiring for 120V and 240V models and proper grounding.
Overload Protection
Explanation of the automatic thermal overload protector and its function.
SECTION D - START UP OPERATION
Pump Rotation Check
Procedure for verifying correct motor rotation before initial use.
Initial Start-Up
Instructions for starting the pump, including handling frozen pumps.
Warranty Registration
Reminder to complete the warranty registration form for product coverage.
SECTION E - PREVENTATIVE MAINTENANCE
General Safety and Electrical Checks
Ensuring electrical parts, cables, and casing are safe and secure.
Servicing and Repairs
Guidelines for restoring original safety and using manufacturer parts.
Shaft Seal Inspection
Procedure for inspecting shaft seals for wear and oil condition.
SECTION F - SERVICE AND REPAIR
Lubrication and Seal Checks
Details on checking/replacing seal oil and performing pressure tests.
Component Replacement
References to repair kit instructions for impeller, seals, cord, and strainer.
SECTION G - WARRANTY REPAIR AND REPLACEMENT PARTS
Required Information for Service
Details needed for warranty claims: part number, model, and date code.
Part Number and Model Identification
Explanation of how to identify and use part and model numbers.
Date Code Interpretation
How to read the unit's manufacturing date code from the nameplate.
TROUBLE SHOOTING
Common Pump Problems and Solutions
Guide to diagnose and fix issues like no run, no shut-off, insufficient capacity, and noise.
PARTS LIST
Component and Repair Kit Identification
Lists part numbers, quantities, and descriptions for pump components and repair kits.
Limited 24 Month Warranty
Warranty Terms and Conditions
Details coverage, exclusions, remedies, and limitations for defects.
WARRANTY REGISTRATION
Product Registration and Returned Goods
Instructions for online product registration and handling returned goods.
Notes
Blank Notes Section
An empty section provided for user notes and annotations.
Need help?
Do you have a question about the 125 Series and is the answer not in the manual?
Questions and answers