Related Manuals for Fischer Panda 10000i
Summarization of Contents
Customer Information and Support
Installation Approval and Warranty
Details the warranty process and options for new and used generators.
Service and Support
Explains routine maintenance and how to get assistance.
Product Registration
Encourages registering the generator for updates and information.
General Instructions and Regulations
Safety First! - Symbol Meanings
Introduces safety symbols and their meanings for safe operation.
Prohibited Actions and Danger Warnings
Highlights potential hazards and forbidden actions associated with the generator.
Hazardous Material and Auditory Warnings
Warns about materials, system pressure, hearing damage, and magnetic fields.
Mandatory Protective Measures and Manual Adherence
Details required PPE and stresses the importance of following the manual and environmental regulations.
Tools for Maintenance and Installation
Lists essential tools needed for maintenance and installation tasks.
Specialized Tools for Measurements
Lists specialized tools like ammeters and torque wrenches for specific measurements.
Manufacturer Declaration and Product Registration
Explains compliance with directives, registration benefits, support, and start-up.
Safe Operation, PPE, and Cleanliness
Emphasizes safe handling, required PPE, and keeping the generator and environment clean.
Fuel, Lubricant, Exhaust, and Fire Safety
Provides guidelines for safe handling of fuels, lubricants, exhaust, and fire prevention.
Burn, Battery, Rotating Parts, and Fluid Safety
Warns about hot components, battery hazards, rotating parts, and handling anti-freeze.
Safety Inspections, Signs, and Generator Hazards
Covers safety inspections, warning signs, and specific installation hazards.
Electrical Safety and Load Management
Explains protective conductors, potential equalization, and switching off loads for safety.
Cable and Battery Safety Instructions
Covers cable safety, battery selection, and important instructions for battery installation.
Battery Installation and Handling Safety
Details battery installation safety, cable routing, and general battery handling precautions.
Battery Precautions and Bank Recommendations
Covers battery acid safety, avoiding sparks, and recommendations for battery banks.
Emergency First Aid Procedures
Steps for Electrical Shock Victims
Provides a step-by-step guide for assisting victims of electrical shock.
Rescue Breathing for Adults
Details the procedure for rescue breathing and checking pulse for adults.
Basic Generator Information and Definitions
Intended Use of the Machine
Explains the primary function of the Fischer Panda generator.
Manual Purpose and Personnel Definitions
Clarifies the manual's scope and defines roles like trained persons and operators.
User Definition and i System Components
Defines the user role and identifies key components of the 'i' system.
Inverter, Manual Components, and Transport Box
Introduces the PMGi inverter, manual contents, and transport box details.
Sound Insulation Capsule Opening Procedures
Provides instructions on how to open MPL and GFK sound insulation capsules.
Generator Transport and Downtime Measures
Covers generator handling, transport, and introduces measures for downtimes.
Battery and Preservation Measures for Downtimes
Details starter battery care, downtime measures, and preservation procedures.
Post-Storage Generator Recommissioning
Details checks and procedures to recommission the generator after extended storage.
The Panda Generator Overview
Generator Type Plate Description
Explains the information presented on the generator's type plate.
Generator Component Views (Right, Left, Front, Back, Top)
Identifies components visible from different views of the generator.
Function Unit Details and iControl2 Panel
Briefly mentions function units and describes the iControl2 panel and its buttons.
Generator System Diagrams
Illustrates the cooling, fuel, air intake, exhaust, electrical, and lubrication systems.
Sensors, Switches, and Oil Pressure Monitoring
Identifies sensors, switches for monitoring, and the oil pressure switch.
Installation Procedures and Safety
Personal Requirements and General Hazard Warnings
Specifies personnel requirements and highlights critical safety warnings for installation.
Installation Safety Hazards and PPE
Details electrical, thermal hazards, mandatory PPE, and disconnecting loads during installation.
Environmental Protection and Component Disposal
Emphasizes environmental protection and proper disposal of components.
Generator Placement and Sound Insulation
Provides guidance on generator placement, access, base preparation, and sound insulation.
Shock Mount Examples
Shows visual examples of shock mounts used for generator installation.
Generator Connections and Fuel System Installation
Illustrates generator connections and introduces fuel system installation.
Fuel System Components and Connections
Shows and describes fuel system components and covers fuel line connections.
DC System Installation and Battery Connections
Explains DC system installation, battery connection, and safety measures.
Battery Bank Connection Schematics (12V/24V)
Provides diagrams for connecting 12V and 24V starter batteries.
Connecting Two 12V Batteries for 24V System
Details the step-by-step process for connecting two 12V batteries to form a 24V bank.
Electrical Component Connections and Schematics
Shows connection schemes for electrical components and the remote control panel.
Radiator Installation and Cooling System Components
Covers cooling system instructions, optional components, fittings, and radiators.
Radiator Installation Locations and Dimensions
Shows examples and dimensions for mounting radiators on vehicle roofs, sides, or undersides.
Roof, Wall, and Underfloor Installation Guidelines
Provides guidelines for radiator installation on roofs, walls, and under floors.
Cabin and Tunnel Installation Best Practices
Illustrates correct vs. incorrect methods for cabin and tunnel radiator installation.
Coolant System Components and Specifications
Outlines requirements for coolant hoses, expansion tanks, and temperature limits.
Temperature Logging and Custom Installations
Mandates temperature logging and covers custom installation agreements.
Radiator Mounting Schematics
Shows schematics for vertical, under-vehicle, and roof-mounted radiator installations.
Fan Control Options and Schematics
Introduces fan control options and provides schematics for 230V fan control.
DC Fan Control and Master-Slave Operation
Explains DC fan control function, settings, and master-slave connection.
Fan Controller Settings and Voltage Operation
Covers fan controller settings, remote control, and voltage-specific operation.
Fan Controller Technical Data and Configuration
Provides detailed technical specifications and configuration notes for fan controllers.
Single-Phase Fan Control (PKE-2.5V, PXET6Q)
Introduces electronic fan control for single-phase fans and their preset configuration.
Sensor Connection for Single-Phase Fans
Details how to connect the sensor to the fan control units.
3-Phase Fan Control (PKD T5) Configuration
Introduces 3-phase fan control and its configuration for Fischer Panda generators.
Exhaust Installation and Isolation Test
Shows exhaust connection schematics and details the isolation test procedure.
Generator Start-up and Warranty Registration
Outlines the start-up process and the importance of the service record for warranty.
Generator Operation Instructions
Personnel Requirements and Hazard Warnings
Specifies personnel requirements and highlights critical safety warnings for generator operation.
Operating Procedures and Low Temperature Operation
Covers general operation, pre-heating, and operating the generator in cold temperatures.
Battery Tips, Load Management, and Overload Prevention
Provides starter battery tips, guidance on load management, and overload prevention.
Safety for Control Systems, Capacitors, and Pre-Checks
Covers protection conductors, control systems, capacitor safety, and pre-start checks.
Generator Starting and Stopping Procedures
Refers to the remote control panel data sheet for generator starting and stopping procedures.
Maintenance Instructions
Personnel Requirements and Maintenance Hazards
Specifies personnel requirements and highlights critical safety warnings for maintenance.
Maintenance Safety Hazards and Battery Precautions
Covers hazards during maintenance like poisoning, high voltage, and battery safety.
Maintenance Intervals and Oil Level Check
Lists maintenance requirements, intervals, and provides instructions for checking engine oil level.
Oil Dipstick Usage and Oil Refill Procedures
Explains how to use the oil dipstick, check oil level, and refill engine oil.
Engine Oil and Filter Replacement Process
Lists items and steps for replacing engine oil and the oil filter.
Oil Change Steps and Used Oil Disposal
Covers initial steps for an oil change and how to drain used engine oil.
Oil Filter and Oil Screen Maintenance
Details removing the oil filter and cleaning the oil screen.
Battery Verification and Post-Oil Change Procedures
Outlines battery verification and steps to complete after an oil change.
Battery Electrolyte Level and Density Checks
Explains how to check and adjust battery electrolyte level and density.
Fuel System Ventilation Procedure
Describes the process for ventilating the fuel system, especially before first operation.
Fuel Filter Replacement and Optional Filter
Provides instructions for replacing the fuel filter and maintaining the optional filter.
Air Filter Replacement Procedure
Explains how to replace the air filter, noting the recommended interval.
Coolant Circuit Ventilation Procedures
Details special notes and precautions for ventilating the cooling system.
Coolant Expansion Tank and Ventilation Points
Covers connecting the expansion tank and opening ventilating screws for coolant circulation.
Coolant System Ventilation Steps
Details steps for filling coolant and repeating the ventilation process.
V-Belt Replacement for Cooling Water Pump
Explains the procedure for replacing the V-belt for the cooling water pump.
V-Belt Replacement Steps and Tightening
Covers pressing the alternator and tightening the V-belt correctly.
Replacing the Electric Starter Motor
Details the process for replacing the electric starter motor.
Starter Motor Removal and Tools
Covers removing the starter and lists the necessary tools.
Starter Motor Reinstallation
Explains how to reinstall the electric starter, reversing the removal steps.
Replacing Fuel Injection Nozzles
Details the procedure for replacing the fuel injection nozzles.
Injection Line and Nozzle Holder Assembly
Covers loosening injection lines, nozzle holder assembly, and provides torque specifications.
Nozzle Seal Replacement and Glow Plug Replacement
Details nozzle seal replacement and the procedure for replacing glow plugs.
Glow Plug Removal and Loosening
Covers removing glow plug connectors and loosening the glow plugs.
Glow Plug Removal and Reinstallation
Details removing the glow plug and reversing steps for reinstallation.
Replacing the Oil Pressure Switch
Provides instructions for replacing the oil pressure switch.
Replacing the Oil Pressure Sensor (Optional)
Details the procedure for replacing the optional oil pressure sensor.
Replacing the Stop Solenoid (Energize to stop)
Explains how to replace the stop solenoid.
Stop Solenoid Disconnection and Screw Removal
Covers disconnecting the stop solenoid and removing fixing screws.
Stop Solenoid Reinstallation and Throttle Check
Details reinstalling the stop solenoid and checking throttle movement.
Throttle Return Check After Stop Solenoid Replacement
Ensures the throttle returns smoothly after stop solenoid replacement.
Valve Cover Gasket Replacement (Kubota 02 Series)
Provides steps for replacing the valve cover gasket on Kubota 02 series engines.
Water Pump Replacement (Kubota 02 Series)
Details the procedure for replacing the water pump on Kubota 02 series engines.
Adjusting Valve Clearance (Kubota 02 Series)
Explains how to adjust valve clearance using a feeler gauge.
Valve Clearance Adjustment and Specifications
Shows valve positions and provides factory specifications for valve clearance.
Replacing Operating Current Relays
Details the steps for replacing operating current relays.
Replacing Fuses
Explains how to replace fuses, including the recommended interval.
Generator Failure and Troubleshooting
Personnel Requirements for Failure Analysis
Specifies that only trained persons should analyze generator failures.
Hazard Notes for Failure Analysis
Highlights critical safety warnings for troubleshooting generator failures.
Maintenance Safety Hazards and Battery Precautions
Covers hazards during analysis like poisoning, high voltage, and battery safety.
Tools and Instruments for Troubleshooting
Lists necessary tools and instruments for diagnosing generator problems.
Generator Overloading and Voltage Fluctuations
Explains overloading effects, voltage drops, and monitoring importance.
Starting Problems: Fuel Solenoid and Stop Solenoid
Details troubleshooting the fuel solenoid valve and explains stop solenoid variations.
Troubleshooting: Starter Motor, Fuel Filter, and Voltage
Addresses starter motor damage, fuel filter issues, and low voltage troubleshooting.
Troubleshooting: Starting, Speed, and Shut-off Issues
Lists causes and solutions for starting failures, speed issues, and motor shut-offs.
Troubleshooting: Coolant, Irregular Running, and Exhaust
Covers coolant issues, irregular operation, motor speed drops, and exhaust problems.
Immediate Shut-off Conditions
Lists critical conditions that require immediate generator shut-off.
Technical Data and Specifications
Technical Data for Panda 4000s to 12000 Models
Provides technical specifications for Panda generators from 4000s to 12000.
Technical Data for Panda 14000 to 30 Models
Lists technical specifications for Panda generators from 14000 to 30.
Technical Data for Panda 30/4 to 22-4 Models
Lists technical specifications for Panda generators from 30/4 to 22-4.
Technical Data for Panda 7.5-4 to 70/4 Models
Lists technical specifications for Panda generators from 7.5-4 to 70/4.
Technical Data for Panda iGenerators (5000i to 25i)
Provides technical specifications for Panda iGenerators from 5000i to 25i models.
Cable Cross Section for Vehicle Generators
Details cable cross-sections and allowed continuous current for vehicle generators.
Conduit Diameter Specifications for Vehicle Generators
Lists the required conduit diameters for cooling water, exhaust, and fuel lines.
Coolant Specifications and Antifreeze
Outlines coolant specifications and the importance of antifreeze mixture ratios.
Engine Oil Classification and Fuel Specifications
Explains engine oil standards and specifies required diesel fuel quality.
Engine Oil Type and Temperature Recommendations
Provides engine oil type recommendations based on operating temperature ranges.
Safety Instructions for Panda iControl2
Personnel Responsibilities for iControl2 Settings
States that settings are for operators, but installation requires trained personnel.
General Safety Instructions for iControl2
Covers safety instructions, warnings, and emphasizes electrical hazards.
Battery Disconnection and System Safety
Stresses battery disconnection before work and observing system safety instructions.
General Operation of the Panda iControl2
Panda iControl2 Panel Overview and Buttons
Describes the iControl2 control panel and its four operating buttons.
Daily Starting Preparation (Marine and Vehicle)
Lists daily checks for marine and vehicle generator operation.
Switching Controller On/Off and Default Display
Explains controller operation and the information on the default display screen.
Default Display Data and Operating Modes
Lists default display data and introduces different operating modes.
Service Information and Start-up Mode
Explains accessing service info and details the start-up process with pre-heating.
Start-up Failures, Override, and Operation Modes
Covers handling start failures, override mode, and operation mode status.
Generator Display Screens (Single and 3-Phase)
Shows display screens for single and 3-phase generators related to inverter data.
3-Phase Generator Inverter Display Screens
Details display screens for 3-phase generator inverter output voltage and current.
Stop Mode and Autostart Mode Activation
Explains how to stop the generator and activate the autostart function.
Autostart Function Warnings and Manual Start
Warns about autostart and manual start procedures.
Set-up Menu Parameters and Navigation
Describes the set-up menu, its parameters, and navigation using control panel buttons.
Backlight and Dimtime Settings
Explains how to adjust display backlight brightness and dimming time.
Configuration, Network ID, Saving Settings, and Autostart
Covers restricted menus, saving settings, and activating/deactivating autostart.
Autostart Function Enable/Disable Procedure
Guides users through enabling or disabling the autostart function via the set-up menu.
Autostart Persistence and Service Interval Reset
Explains autostart persistence and how to reset the service interval indicator.
Service Interval Reset and Fuel System Priming
Explains resetting the service interval and priming the fuel system.
Installation Procedures and Safety
General Installation Guidelines and Personnel
States installation guidelines and emphasizes qualified personnel for the task.
Installation Hazard Warnings
Highlights critical safety warnings for installation, including automatic start-up and injury risks.
Installation Electrical, Thermal Hazards, PPE, and Disposal
Details electrical, thermal hazards, mandatory PPE, component disposal, and environmental protection.
iControl2 Panel Wiring and Terminal Assignments
Shows panel wiring and details terminal assignments for standard and CAN bus connections.
iControl2 Panel Dimensions
Provides dimensional drawings for the Panda iControl2 panel housing.
iControl2 Controller Wiring and Connector Details
Shows the wiring diagram and lists details of the connectors for the iControl2 controller.
iControl2 Controller Terminal Assignments
Details terminal assignments for 18-pin, standard bus, and CAN bus connectors.
System Start-up and Warranty Registration
Outlines the start-up process and the importance of the service log for warranty.
Maintenance of Control Systems
iControl2 Controller Maintenance (Maintenance-Free)
States that the iControl2 controller is maintenance-free and describes housing cleaning.
iControl2 Remote Control Panel Maintenance
Notes that the remote control panel is maintenance-free and describes display cleaning.
Warnings and Error Messages
Generator Operation Warnings
Explains that warnings are issued when monitored variables reach defined thresholds.
Examples of Displayed Warnings
Shows examples of warnings like low battery power and high winding temperature.
Table of Warning and Error Messages
Compiles warning and error messages and their meanings for the Panda iControl 2.
Warning and Fault Thresholds by Generator Type
Compiles warning and fault thresholds based on different generator types.
Bus Communication Errors and Thresholds
Explains bus errors and continues the table of warning/fault thresholds.
Technical Data Annex
Technical Data for iControl2 Control Unit
Provides technical specifications for the iControl2 control unit.
Technical Data for iControl2 Remote Control Panel
Provides technical specifications for the iControl2 remote control panel.
Inverter Panda PMGi 8000 / PMGi 10000
Safety Instructions for PMGi Inverters
Highlights safety precautions for operating the generator and PMGi inverter.
PMGi Type Plate and Front Connections
Shows the PMGi type plate and describes the front-side connection sockets.
PMGi 8000 Socket Pin Assignments
Details the pin assignments for PMGi 8000 AC output and input sockets.
PMGi Back Side and Attention Warnings
Describes the PMGi back side features and provides critical attention warnings.
Settings for iGenerators with Power Inverter
Explains necessary settings modifications for using power inverters with iGenerators.
Victron VE Configure II Software Settings
Details general settings in Victron software, including UPS and current limiter.
Inverter Assist Current Boost Factor Adjustment
Explains how to adjust the assist current boost factor to reduce inverter action.
PMGi Operation Manual: Remarks, Load, and Automatic Start
Covers operating remarks, load limits, automatic start, and status LEDs.
PMGi Cooling System Maintenance
Emphasizes cleaning the PMGi fan and heat sinks for optimal performance.
PMGi Installation Guidelines
Covers vertical mounting, electrical connections, RCD, and isolation control.
PMGi Technical Data: General, Generator, and Output
Provides technical data for PMGi inverters, including general specs and output parameters.
PMGi Technical Data: Frequency, Regulation, and Stability
Details technical data on frequency, regulation, stability, and protection fuses.
PMGi Technical Data: Protection, Cable, and Temperature
Provides technical data on protection fuses, cable cross-sections, and temperatures.
PMGi Technical Data: Overload and Short Circuit Points
Details overload switch points and fuse requirements for short circuit protection.
Need help?
Do you have a question about the 10000i and is the answer not in the manual?
Questions and answers