Do you have a question about the 8000i and is the answer not in the manual?
Questions and answers
Stephen Johnson
April 6, 2025
What is the purpose of the Autosart mode?
3 comments:
Mr. Anderson
April 6, 2025
The purpose of the Autostart mode on the Fischer Panda 8000i is to automatically start and stop the generator. When the Autostart function is active, a jumper between pin 6 (UBAT) and pin 7 (USTARTI) on the Phoenix jack triggers the generator to start with a 5-second delay. Removing the jumper stops the generator, also with a 5-second delay. The function remains active even after switching the controller off and on and must be manually deactivated in the setup menu.
This answer is automatically generated
Stephen johnson
April 6, 2025
@Mr. Anderson Thanks for the copy and paste from the manual but my question is how, as an owner do I use the autostart to my advantage.
Steve Johnson
April 6, 2025
@Mr. Anderson FYI I had just finished a service and turned on the battery switch when it started. The cover was still off and I could have had hands on the generator when it started without any input from me. A very hazardous situation.
Need help?
Do you have a question about the 8000i and is the answer not in the manual?
Questions and answers
What is the purpose of the Autosart mode?
The purpose of the Autostart mode on the Fischer Panda 8000i is to automatically start and stop the generator. When the Autostart function is active, a jumper between pin 6 (UBAT) and pin 7 (USTARTI) on the Phoenix jack triggers the generator to start with a 5-second delay. Removing the jumper stops the generator, also with a 5-second delay. The function remains active even after switching the controller off and on and must be manually deactivated in the setup menu.
This answer is automatically generated
@Mr. Anderson Thanks for the copy and paste from the manual but my question is how, as an owner do I use the autostart to my advantage.
@Mr. Anderson FYI I had just finished a service and turned on the battery switch when it started. The cover was still off and I could have had hands on the generator when it started without any input from me. A very hazardous situation.