HP P5389A - Intel Pentium III-S 1.4 GHz Processor Upgrade Installation Manual page 16

26. Repeat until all free space is allocated and select Next to continue.
27. Highlight the network board and specify the protocol. Once all Network boards have
been assigned a protocol, click Next.
NOTE: NetWare 6 requires at least one network card to have an IP address.
28. If you wish to configure the Domain Name Service, do so here. If not, click Next
and OK to the warning.
29. Select your time zone and click Next.
30. Choose whether to create a New NDS Tree or use and Existing NDS Tree and click
Next.
31. Enter the Tree name, the Context for Server Object, and the administrator
password and click Next.
32. Review NDS and click Next.
33. Insert NetWare License diskette into the floppy drive and click the directory tree icon
next to the License Location field. Select the NLF file displayed and click OK. The
license information will be displayed under Description. Verify and click Next.
34. If you wish to install other items or products, do so here by selecting Custom and
clicking Next. If not, click Next.
35. Click Next at the Novell Certificate Server 2.20 Objects window.
NOTE: Depending on the options you chose, you may receive additional prompts.
Enter the required information and click Next.
36. Review Summary and click Finish.
37. Refer to the Novell NetWare installation procedures for all other installation issues.
After completing the installation of NetWare, you may need to install a support pack
from Novell. This can be downloaded from:
http://support.novell.com
Netware 6.5 Installation
The following section contains procedures for installing NetWare 6.5 as a new installation only.
Upgrades and migrations from previous versions of NetWare are not covered in this paper.