HP P5389A - Intel Pentium III-S 1.4 GHz Processor Upgrade Installation Manual page 12

29. Select your time zone and click Next.
30. Choose whether to create a New NDS Tree or use and Existing NDS Tree and click
Next.
31. Enter the Tree name, the Context for Server Object, and the administrator
password and click Next.
32. Review NDS and click Next.
33. Insert NetWare License diskette into the floppy drive and click the directory tree icon
next to the License Location field. Select the NLF file displayed and click OK. The
license information will be displayed under Description. Verify and click Next.
34. If you wish to install other items or products, do so here by selecting Custom and
clicking Next. If not, click Next.
35. Accept the default Novell Certificate Server 2.0 Objects by clicking Next, then
clicking OK to the Organizational CA Warning.
NOTE: Depending on the options you chose, you may receive additional prompts.
Enter the required information and click Next.
36. Review Summary and click Finish.
37. Refer to the Novell NetWare installation procedures for all other installation issues.
After completing the installation of NetWare, you must install the latest support pack
from Novell. This can be downloaded from:
http://support.novell.com
Completing the Installation of the HP NetRAID-1Si/HP NetRAID-3Si I2O driver on
NetWare 5.1/Small Business Suite 5/5.1
After the initial installation of NetWare, you may set the HP NetRAID-1Si or HP
NetRAID-3Si adapter to operate in I2O mode. Perform the following:
1. Insert the NetWare 5.1 NOS drivers diskette into the floppy drive and copy the
following files from the a:\i2odac directory to the C:\nwserver\drivers directory:
BKSTROSM.*
SCSIOSM.*
2. Next, edit the C:\NWSERVER\STARTUP.NCF file and add the following two lines
after the LOAD I2OPCI.NLM statement. If the LOAD I2OPCI.NLM statement is
not in the STARTUP.NCF file, add it.