Specifications; Remote Control Unit (Rc-1105) - Denon AVR-989 Owner's Manual

Specifications

n
Audio section
• Power amplifier
Rated output: Front (A, B):
115 W + 115 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
145 W + 145 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Center:
115 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
145 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Surround:
115 W + 115 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
145 W + 145 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Surround Back:
115 W + 115 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
145 W + 145 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Dynamic power: 130 W x 2ch (8 Ω/ohms)
180 W x 2ch (4 Ω/ohms)
Output connectors: Front:
Center, Surround, Surround Back:
• Analog
Input sensitivity / Input impedance: 200 mV / 47 kΩ/kohms
Frequency response: 10 Hz ~ 100 kHz — +1, –3 dB (DIRECT mode)
S/N: 102 dB (IHF-A weighted, DIRECT mode)
Distortion: 0.005 % (20 Hz ~ 20 kHz) (DIRECT mode)
Rated output: 1.2 V
• Digital
D/A output: Rated output — 2 V (at 0 dB playback)
Total harmonic distortion — 0.008 % (1 kHz, at 0 dB)
S /N ratio — 102 dB
Dynamic range — 96 dB
Digital input: Format — Digital audio interface
• Phono equalizer (PHONO input — REC OUT)
2.5 mV
Input sensitivity:
RIAA deviation: ±1 dB (20 Hz to 20 kHz)
S/N: 74 dB (A weighting, with 5 mV input)
Rated output: 150 mV
Distortion factor: 0.03 % (1 kHz, 3 V)
n
Video section
• Standard video connectors
Input / output level and impedance: 1 Vp-p, 75 Ω/ohms
Frequency response: 5 Hz ~ 10 MHz — +0, –3 dB (when video convert set to "OFF")
• S-Video connectors
Input / output level and impedance: Y (brightness) signal — 1 Vp-p, 75 Ω/ohms
C (color) signal — 0.286 Vp-p, 75 Ω/ohms
Frequency response: 5 Hz ~ 10 MHz — +0, –3 dB (when video convert set to "OFF")
• Color component video connector
Input / output level and impedance: Y (brightness) signal — 1 Vp-p, 75 Ω/ohms
P / C
B
P / C
R
Frequency response: 5 Hz ~ 100 MHz — +0, –3 dB (when video convert set to "OFF")
A or B 6 ~ 16 Ω/ohms
A + B 8 ~ 16 Ω/ohms
6 ~ 16 Ω/ohms
signal — 0.7 Vp-p, 75 Ω/ohms
B
signal — 0.7 Vp-p, 75 Ω/ohms
R
n
Tuner section
(note: µV at 75 Ω/ohms, 0 dBf = 1 x 10
Receiving Range: 87.5 MHz ~ 107 .9 MHz
Usable Sensitivity: 1.0 µV (11.2 dBf)
50 dB Quieting Sensitivity: MONO
STEREO 23 µV (38.5 dBf)
MONO
S/N (IHF-A):
STEREO 72 dB
Total harmonic Distortion (at 1 kHz): MONO
STEREO 0.3 %
n
General
Power supply: AC 120 V, 60 Hz
Power consumption: 6.0 A
0.1 W (Standby)
Maximum external dimensions: 434 (W) x 171 (H) x 414 (D) mm (17-3/32" x 6-47/64" x 16-19/64")
12.8 kg (28 lbs 3.5 oz)
Weight:
n

Remote control unit (RC-1105)

LR6/AA type (two batteries)
Batteries:
Maximum external dimensions: 52 (W) x 243 (H) x 21 (D) mm (2-3/64" x 9-9/16" x 53/64")
Weight: 184 g (Approx 6.5 oz) (including batteries)
z For purposes of improvement, specifications and design are subject to change without notice.
[FM] [AM]
W)
-15
520 kHz ~ 1710 kHz
18 µV
1.6 µV (15.3 dBf)
77 dB
0.15 %
0