Playback; Preparations; Turning The Power; Selecting The Input Source - Denon AVR-989 Owner's Manual

Playback

Symbols used to indicate buttons in this manual
Button located on both the main unit
and the remote control unit
Button only on the main unit
Button only on the remote control unit
<SOURCE SELECT> <SOURCE> <MASTER VOLUME>
<ON/STANDBY>
<POWER>
PHONES jack
[Front]
[ON/SOURCE]
[OFF]
[QUICK SELECT]
[SOURCE
SELECT]
[MASTER
VOLUME]
[MUTING]

Preparations

BUTTON
Turning the Power On
<BUTTON>
[BUTTON] 1
<POWER>
Press .
The power indicator lights red and the power is set to the
standby mode.
2
<ON/STANDBY>
Press
The power indicator fl ashes green and the power turns on.
[SOURCE SELECT]
b Also press
turns on. In this case the input source is selected by remote
control unit.
[QUICK SELECT]
b Also press
turns on. In this case Quick Select is selected.
Turning the Power Off
<SPEAKERS> <ON/STANDBY>
q Press
The power is set to the standby mode.
<POWER>
w Press .
[Rear]
The power indicator turns off, and so does the power.
NOTE
Power continues to be supplied to some of the circuitry even when the
power is in the standby mode. When leaving home for long periods of
time or when traveling, either press
[SOURCE
or unplug the power cord from the power outlet.
SELECT]

Selecting the Input Source

Select the source using
<SOURCE SELECT>
Turn
between input sources.
If "ZONE2 / Rec Select", "Tuning Preset" or "Video Select" is selected,
<SOURCE>
press before turning
[ON/SOURCE]
or .
when in standby mode, the power
when in standby mode, the power
[OFF]
or .
<POWER>
to turn off the power,
SOURCE SELECT
.
[SOURCE SELECT]
or press to switch
<SOURCE SELECT>
.

Operations During Playback

Adjusting the Master Volume
<MASTER VOLUME>
Either turn
VOLUME]
.
[Variable range] – – – –80.0dB ~ 18.0dB
NOTE
The adjustable range will differ depending upon factors such as the
type of input signal and the channel level setting.
Turning Off the Sound Temporarily (Muting)
[MUTING]
Press .
The sound is reduced to the level set at menu "Manual Setup" –
"Option Setup" – "Volume control" – "Mute Level".
[MUTING]
To cancel, press again. Muting can also be canceled by
adjusting the master volume.
Listening with Headphones
Plug the headphones into the PHONES jack on the main
unit.
The sound from the speakers and pre-out connectors is automatically
cut.
NOTE
Be careful not to set the volume too high when using headphones.
Switching the front speakers
<SPEAKERS>
Press .
Front A Front B
Front A+B
NOTE
<SPEAKERS>
When set to "Custom", does not operate.
[MASTER
or press
0