Other Operations and Functions
Symbols used to indicate buttons in this manual
Button located on both the main unit
and the remote control unit
Button only on the main unit
Button only on the remote control unit
<SOURCE SELECT>
INPUT MODE
<ZONE 2 / REC SELECT>
Surround mode
[Front]
[SOURCE
SELECT]
Other Operations
BUTTON
Playing Super Audio CD
<BUTTON>
[BUTTON]
1
Assign the HDMI input connector at the "HDMI"
setting (vpage 38).
2
<SOURCE SELECT>
Either turn
SELECT]
to select the input source assigned in step 1.
The "
" indicator lights on the display.
3
Press INPUT MODE to select "AUTO" (vpage 37).
Select the input mode according to the program source to be
played.
4
Select the surround mode (vpage 40 ~ 42).
We recommend playing in the DIRECT mode.
5
Start playing the Super Audio CD.
The "
" indicator lights on the display.
[Rear]
For operating instructions, refer to the respective equipment's
operating instructions.
[SOURCE
• When playing DSD signals in the DIRECT or PURE DIRECT mode,
SELECT]
the DSD signals are converted as such into analog signals. When
playing in other surround modes, the DSD signals are fi rst converted
into PCM format, then into analog signals.
• "DSD DIRECT" is shown on the display when playing DSD 2-channel
Surround mode
signals in the DIRECT mode. "DSD MULTI DIRECT" is shown on
INPUT MODE
the display when playing DSD multi-channel signals in the DIRECT
mode.
Recording on an External Equipment
(REC OUT mode)
You can listen to one program source while recording a different
program source.
1
<ZONE2 / REC SELECT>
Press
"ZONE2 Source" is shown on the display.
2
[SOURCE
<SOURCE SELECT>
or press
Turn
displayed.
The "
" indicator lights.
ZONE2 Source
RECOUT SIRIUS
3
<SOURCE SELECT>
Turn
to be recorded.
4
Play the program source.
For operating instructions, refer to the respective equipment's
operating instructions.
To record FM or AM broadcasts, select the broadcast (vpage
51).
5
Start recording.
For operating instructions, refer to the respective equipment's
operating instructions.
until "ZONE2 Source".
until "RECOUT Source" is
ZONE2 TUNER
····
ZONE2 SIRIUS
······
RECOUT TUNER
RECOUT Source
to choose the input source