Table of Contents
Advertisement
ENGLISH
SPECIFICATIONS
AMPLIFIER SECTION
TUNER SECTION
Continuous Power Output
65 W + 65 W (4 ohms, 1 kHz)
[FM] (note: pV at 75 ohms, 0 dBf = 1 x 10° W)
(DIN):
Receiving Range:
87.5 ~ 108 MHz
Power Bandwidth (IHF):
40 Hz ~ 40 kHz (T.H.D. 0.15% both channels
Usable Sensitivity:
0.9 pV (10.3 dBf)
driven into 8 chms)
Signal to Noise Ratio
(IHF-A):
MONO
82 dB
Total Harmonic Distortion:
0.03% (-3 dB at rated output, 8 ohms)
STEREO
78 dB
Frequency Response:
PHONO RIAA Standard Curve (Recording Out-
Image Rejection:
65 dB
put)
Selectivity (+ 300 kHz):
55 dB
MM)
20Hz ~ 20 kHz+0.5 cB
CD, VIDEO,
20 Hz ~ 50 KHz # 1.5 dB
Frequency Response:
30 Hz ~ 15kHz *°2 ap
TAPE
(at 1 W)
as
Stereo Separation
Input Sensitivity and
{at 1 kHz):
40 dB
Impedance:
PHONO
MM
2.5 mV
47 kohms
[AM]
CD, VIDEO,
150mV
= 25 kohms
Receiving Range:
522 ~ 1611 kHz
TAPE
Maximum Input Level:
Usable Sensitivity:
18 pV
(at 1 kHz)
PHONO MM
120 mV
Signal to Noise Ratio:
55 dB
Signal to Noise Ratio
(IHF-A):
PHONO MM
78 dB (at 5.0 mV input)
CD, VIDEO,
98 dB
General
TAPE
Power Supply:
AC 230 V 50 Hz
Tone Controls:
BASS
+ 10 dB at 100 Hz
Power Consumption:
125 W
TREBLE
+ 10 dB at 10 kHz
Power Outlet:
SWITCHED 100 W
Loudness Control Effect:
Variable Loudness at maximum position
Dimensions:
434 mm (W) x 119 mm (H)
50 Hz/10 kHz, + 10 dB/+5 dB
x 310 mm (D)
Weight:
5.9 kg
REMOTE CONTROL UNIT
RC-174
Remote control system:
Infrared pulse system
Power supply:
3V DC Two size "AA" (R6)
dry cell batteries
External dimensions:
60 mm (W) x 175 mm (H)
x 18 mm (D)
Weight:
120 g (includes batteries)
Design and specifications are subject to change without prior notice.
15
Advertisement
Table of Contents
