Scanning A Document Using The Wia Driver (Windows ® Xp/Windows Vista ® /Windows ® 7); Wia Compliant; Scanning A Document Into The Pc - Konica Minolta bizhub 20 Software User's Manual

Scanning
Scanning a document using the WIA driver
®
(Windows XP/Windows Vista

WIA compliant

®
For Windows XP/Windows Vista
scanning images from the machine. You can scan images directly into the PaperPort™ 11SE viewer that
KONICA MINOLTA included with your machine or you can scan images directly into any other application
that supports WIA or TWAIN scanning.
Note
®
• Windows XP does not support Duplex Scan in the WIA driver.
• Duplex Scan is not available for legal size paper.

Scanning a document into the PC

There are two ways in which you can scan a whole page. You can either use the ADF (automatic document
feeder) or the scanner glass.
If you want to scan and then crop a portion of a page after pre-scanning the document, you need to use the
scanner glass. (See Pre-Scanning to crop a portion you want to scan using the scanner glass on page 42.)
a
Load your document.
b
Start the ScanSoft™ PaperPort™ 11SE software that was installed during the Multi-Function Suite
installation to scan a document.
Note
The instructions for scanning in this Guide are for when you use ScanSoft™ PaperPort™ 11SE. The
scanning steps may vary when using other software applications.
c
Click File, then Scan or Get Photo.... You can also click the Scan or Get Photo button.
The Scan or Get Photo panel appears on the left side of the screen.
d
Click Select button.
e
Choose the scanner you are using from the Available Scanners list.
Note
Choose WIA:KONICA MINOLTA bizhub 20, WIA:KONICA MINOLTA bizhub 20 LPT or
WIA:KONICA MINOLTA bizhub 20 LAN.
f
Check the Display scanner dialog box on the Scan or Get Photo panel.
g
Click Scan.
The Scanner Setup dialog box appears.
®
/Windows
® ®
/Windows 7 you can choose Windows
®
7)
®
Image Acquisition (WIA) for
2
2
2
2
40