Paper Source - Konica Minolta bizhub 20 Software User's Manual

Printing
Booklet
When you want to do print a booklet, use this function. To make a booklet, fold the printed pages down in
the middle.
If you choose Booklet and click Duplex Settings... button, you can set the following settings.
• Duplex Mode
• Use Duplex Unit
In this mode, the printer prints on both sides of the paper automatically.
• Manual Duplex
In this mode, the printer prints all the even numbered pages first. Then the printer driver will stop and
show the instructions required to re-install the paper. When you click OK the odd numbered pages
will be printed.
• Duplex Type
There are two types of duplex binding directions available for each orientation.
Flip on Left Edge
• Binding Offset
If you check the Binding Offset option, you can also specify the offset for binding in inches or
millimeters.

Paper Source

You can choose Auto Select, Tray1, Tray2
first page and for printing from the second page onwards.
1
Available if the optional tray is installed.
Flip on Right Edge
1
, MP Tray or Manual and specify separate trays for printing the
1
1
16