Selecting Driver Options/Defaults (For Windows); Windows Vista/Xp/Server 2003/2000 - Konica Minolta bizhub C31P User Manual

Selecting Driver Options/Defaults
(for Windows)
Before you start working with your printer, you are advised to verify/change
the default driver settings. Also, in case you have options installed, you
should "declare" the options in the driver.

Windows Vista/XP/Server 2003/2000

1
Choose the driver's properties as follows:
–
(Windows Vista)
From the Start menu, click Control Panel, then Hardware and
Sound, and then click Printers to open the Printers directory.
Right-click the KONICA MINOLTA bizhub C31P PCL6 or KONICA
MINOLTA bizhub C31P PS printer icon, and then click Properties.
–
(Windows XP/Server 2003)
From the Start menu, choose Printers and Faxes to display the
Printers and Faxes directory. Right-click the KONICA MINOLTA
bizhub C31P PCL6 or KONICA MINOLTA bizhub C31P PS printer
icon, and then click Properties.
–
(Windows 2000)
From the Start menu, choose Settings and then Printers to display
the Printers directory. Right-click the KONICA MINOLTA bizhub C31P
PCL6 or KONICA MINOLTA bizhub C31P PS printer icon, and then
click Properties.
2
If you have installed options, proceed with the next step. Otherwise, skip
to step 9.
3
Select the Configure tab.
4
Check that the installed options are correctly listed. If not, proceed with
the next step. Otherwise, continue with step 8.
5
Click the Refresh to automatically configure installed options.
6
From the Device Options list, select an option one at a time, and then
select Enable or Disable from the Settings menu.
12
The Refresh is available only if bi-directional communication is
available with the printer; otherwise it is grayed out.
If Printer Memory is selected, select 256 MB, 512 MB, 768 MB or
1024 MB, according to the installed memory. The factory default
setting is 256 MB.

Selecting Driver Options/Defaults (for Windows)