Selecting Driver Options/Defaults (For Windows); Windows Vista/Xp/Server 2003/2000 (Konica Minolta Mc4650 Pcl6, Konica Minolta Mc4650Ps) - Konica Minolta 4650EN User Manual

Selecting Driver Options/Defaults
(for Windows)
Before you start working with your printer, you are advised to verify/change
the default driver settings. Also, in case you have options installed, you
should "declare" the options in the driver.
Windows Vista/XP/Server 2003/2000 (KONICA MINOLTA
mc4650 PCL6, KONICA MINOLTA mc4650PS)
1
Choose the driver's properties as follows:
–
(Windows Vista)
From the Start menu, click Control Panel, then Hardware and
Sound, and then click Printers to open the Printers directory.
Right-click the KONICA MINOLTA mc4650 PCL6 or KONICA
MINOLTA mc4650 PS printer icon, and then click Properties.
–
(Windows XP/Server 2003)
From the Start menu, choose Printers and Faxes to display the
Printers and Faxes directory. Right-click the KONICA MINOLTA
mc4650 PCL6 or KONICA MINOLTA mc4650 PS printer icon and
choose Properties.
–
(Windows 2000)
From the Start menu, choose Settings and then Printers to display
the Printers directory. Right-click the KONICA MINOLTA mc4650
PCL6 or KONICA MINOLTA mc4650 PS printer icon and choose
Properties.
2
If you have installed options, proceed with the next step. Otherwise, skip
to step 9.
3
Select the Configure tab.
4
Check that the installed options are correctly listed. If not, proceed with
the next step. Otherwise, continue with step 8.
5
Click the Refresh to automatically configure installed options.
6
From the Device Options list, select an option, one at a time, and then
select Enable or Disable from the Settings menu.
12
Downloaded From ManualsPrinter.com Manuals
The Refresh is available only if bi-directional communication is
available with the printer; otherwise it is grayed out.
For models with a embedded duplex unit (magicolor 4650DN),
select magicolor 4650DN for Printer Model in the Device
Options list.

Selecting Driver Options/Defaults (for Windows)