Brother HL-1660e Series User Manual page 100
Service manual
Hide thumbs
Also See for HL-1660e Series:
- User manual (258 pages) ,
- Parts reference list (25 pages) ,
- Technical reference manual (517 pages)
Advertisement
(10) Press the
CONTINUE
CART CHECK START
FONTCART OK!!
(11) Flash memory check
CARD CHECK START
FLASH OK!!
(12) MIO check
MIO CHECK START
RAM SIZE =
Now initializing
LJ WAIT 001P T1
CARTRIDGE"
will be displayed.
LJ READY 001P T1
(13) Turn off the power.
Note:
The checks on and after (10) are carried out automatically, and if an error is detected,
on of the following messages will be displayed. Checks can be resumed if the
CONTINUE switch is pressed.
FONTCART ERROR!!
NO FONTCART!!
FLASH ERROR!!
NO FLASH CARD!!
CHECK WP SWITCH
45 MIO ERROR
NO MIO BOARD!!
Now initializing
switch to check the font cartridge.
The font cartridge is normal.
The flash memory is normal.
2M
You can turn off the power when this message is displayed. If there
is no toner cartridge or paper, the message "14 NO
Font cartridge error (this message is displayed if a font cartridge
than a Hewlett Packard Company C2053A#C01 Word Perfect is
used.)
No font cartridge is set.
Flash memory error
No flash memory is set.
The Write Protect switch of the flash memory is on.
MIO error
No MIO board is set.
MIO error if this message remains displayed.
VI - 24
Advertisement
Chapters
Troubleshooting
