Brother HL-1660e Series User Manual page 235

5. Press the SET switch.
When you enter the "SELECT FONT" menu, you can select the
internal font, optional slot font, or permanent download font. The
display shows the following message.
INTERNAL FONT p*
Press the or switch until the desired font source appears on the
display.
Display Message
INTERNAL FONT
SLOTFONT A
SLOTFONT B
PERMANENT FONT
Since these steps instruct you to select the standard font, select the
"INTERNAL FONT" message.
Notes
When you select the optional fonts or permanent download fonts, note the
following:
If the optional font cartridge/card is not installed, the optional font
cannot be selected. No selection appears on the display.
If permanent fonts are not downloaded in the HP emulation mode or
another emulation mode is selected, they cannot be selected. No
selection appears on the display.
The list you can print out with the TEST switch helps you to select the
optional fonts or permanent download fonts. See "TEST switch" in
this chapter or "Selecting the Optional Fonts" in Chapter 5.
6. Press the SET switch.
When you enter the font setting mode, the display first shows the
current font with an asterisk.
BROUGHAM
7. Press the or switch until the desired font appears on the display.
CHAPTER 4 CONTROL PANEL
Font Source
Internal font of the printer
Optional card font in the upper slot
A
Optional cartridge font in the lower
slot B
Permanent download font defined
in the HP emulation mode
p*
4–51