1.17 Regist sensor actuator
(1) Remove the actuator by shifting it to the left from the chassis hole.
Regist sensor actuator
1.18 MP Paper Detection Actuator
(1) Remove the actuator by removing the 2 bearings from the roller holder.
This operation should be carried out with the PCB removed.
MP paper detection actuator
1.19 PE Sensor Actuator MP
(1) Pull out the actuator by shifting it to the right from the chassis hole.
Regist sensor actuator
Figure 4.29
Roller holder
Figure 4.30
PE sensor actuator MP
Figure 4.31
IV - 13
MP paper detection actuator
PE sensor actuator MP