Brother HL-1660e Series User Manual page 51

1.4 Font Cover Assy
(1) Remove the font cover assy by loosening the screw on the top and releasing the hooks
on the bottom and the side.
1.5 Upper Cover Assy, Rear Cover Assy
1.5.1 Upper cover assy, rear cover assy
(1) Loosen the 4 screws on the rear (the upper 2 screws secure also the upper cover ).
(2) Loosen the top left screw.
(3) Remove the upper cover assy ( A ) (Refer to Figure 4.5).
(4) Remove the rear cover by pulling it rearward ( B ) (Refer to Figure 4.5).
Screw
Hook
Figure 4.4
Upper cover assy
Rear cover assy
Figure 4.5
Upper cover assy
Figure 4.6
Screw
Hook
Font cover assy
A
B
Screws
Note: The hook is released automatically
IV - 4
Screws
hook
by removing the upper cover assy
in the direction of the arrow.