Brother HL-1660e Series User Manual page 158

1. Open the multi-purpose tray by pressing the front door of the tray
lightly and lowering it gently.
Note
Pull out the extension tray of the multi-purpose tray for long paper if it is
necessary.
Fig. 2-19 Opening the Multi-purpose Tray
and Pulling Out the Extension Tray
2. Lift up and slide the paper width guide to the far right side.
3. Place a stack of paper or envelopes on the tray until it is securely
seated.
Notes
When you place paper on the multi-purpose tray, note the following:
The print surface must be face up.
The leading edge must be placed inside first and lightly against the
printer.
The left side must be aligned with the left guide.
The top of the paper stack must be under the holders on both sides of
the tray. The maximum thickness is 16.5 mm or 0.65 inches.
CHAPTER 2 GETTING STARTED
2–15