Select the ID number with the
so that the printer deletes the selected font.
• Format Card
You can format the flash memory card or the HDD card to delete its
contents. Instructions are in the following menu:
When you press the SET switch in this menu, the printer asks if you want
to delete all contents of the card:
Press the SET switch to start formatting the card.
When you want to cancel formatting, move to the following menu with the
or
ADVANCED MODE
NETWORK MODE
Display Message
LOCK PANEL=OFF
AUTO FF=ON
FF SUPPRESS=OFF
TONER LOW=CONT
Lock panel
If someone other than you has changed the panel switch settings and you
do not know about it, the printer may not print as you expected or it may
not print at all.
FONT ID=#####
FORMAT CARD
SET-->DELETE ALL
switch and press the SET switch.
exit
Network Mode
Turns on or off lock panel function.
Turns on or off auto form feed.
Turns on or off the form feed suppress
function.
Select the printer's action when "TONER
EMPTY" is detected
CHAPTER 4 CONTROL PANEL
or
switch and press the SET switch,
4–41