Problem No. 5
Solution No. 5
Problem No. 6
Solution No. 6
Problem No. 7
Solution No. 7
When printing from some software applications such as Power
Point, it takes a long time and the print out is incorrect.
The problem is due to the printer, which is being configured to Start
printing after the first page is spooled. To change this setting:
•
Go to Control Panel - Printers and click on your printer.
•
Then select File - Properties - Details.
•
When the Details screen appears, click the Spool Settings button.
•
When the Spool Settings dialogue box appears, choose Start
printing after last page is spooled and click OK.
The Configuration button on the Printer Status screen in BiAdmin is
grayed out, even though my printer is bi-directional.
The button is unavailable if the printer is busy. You must wait until the
printer is idle.
My old printer cannot print or prints garbage.
If the printer you used is an old model with low speed, the following
steps may solve this problem:
Try the following:
•
Open the BiAdmin Utility.
•
Click the Printer Status icon.
•
Change the Printer Type setting to Low Speed or set the Handshake
Signal setting to Ack & Busy.
Page 55