TRENDnet TE100-P1U User Manual page 11

3. Click Next on the first screen of the Wizard, to view a list of Print Servers on your LAN.
4. Select your new Print Server, then click Next to continue.
5. Enter the required data on the following screen.
•
Name of the Print Server can be changed if you wish.
•
Comment is optional.
•
Select or enter the Workgroup name for this Print Server.
6. Click Next to configure the TCP/IP Screen:
•
Select Obtain IP Address automatically if your LAN has a DHCP Server, otherwise
select Fixed IP Address.
•
For Fixed IP Address, enter an unused address from the range used on your LAN, or
click the Suggest New Values Button.
Use the same Network Mask and Gateway as PCs on your LAN.
7. Click Finish to save the data to the Print Server.
Note: To install the Wizard on your PC, use the "Installation" option.
If the desired Print Server is not listed:
•
Check all cables to the Print Server.
•
Check the Print Server's LEDs:
The Red LED should be OFF and the Green LED should be ON or flashing.
Figure 3: Print Server Screen
Page 8