Port Tab - TRENDnet TE100-P1U User Manual

Port Tab

This screen has 2 panels - Physical Port and Logical Port.
Physical Port
The following settings are available:
•
Selected Physical Port - Select the Physical Printer Port you wish to configure.
•
Handshake Signal - Select Busy Only or Busy & Ack for the Physical Port.
•
Printer Type - Select High Speed or Low Speed for the Printer Type.
Logical Port
Logical Ports (printers) can be used in the Unix environment. The following settings are
available:
•
Selected Logical Port - Select the Logical Printer Port you wish to configure.
•
Map to Physical Port - Select the physical Printer Port which the Logical printer will use.
•
Convert LF to LF+CR - If checked, LF (line feed) characters are changed to CR+LF
(carriage return + line feed).
•
Prefix of Job - The printer control string (in hex) to be sent to the printer before each print
job. This string cannot exceed 15 characters.
•
Suffix of Job - The printer control string (in hex) to be sent to the printer after each print
job. This string cannot exceed 15 characters.
The Get Defaults button will reset all settings to their factory-default values.
Figure 28: Port Screen
Page 33