Chapter 5 Biadmin Management Utility; Requirements; Installation; Operation - TRENDnet TE100-P1U User Manual

Chapter 5
BiAdmin Management Utility
This chapter describes the installation and operation of the BiAdmin Configuration &
Management program.

Requirements

This program requires:
•
Windows 95, Windows 98 or ME
•
Windows NT 4.0, Windows 2000 or XP
Additional Recommendations:
•
Screen resolution of 800 * 600 or greater.

Installation

Use the supplied CD-ROM. This CD-ROM will usually auto-run. If auto-run is disabled on
your PC, run the SETUP.exe program in the root folder.
•
Select Installation and this will give you the options for BiAdmin installation
•
BiAdmin is always installed if the Administrator option is chosen.
•
If using the Custom option on the CD-ROM, select BiAdmin.

Operation

•
Start the program by using the icon created by the setup program.
•
When run, the program searches the network for all active Print Servers, then lists them on
screen, as shown by the example screen below.
Main Screen
Figure 22: BiAdmin Main Screen
Page 24