Connecting To The Print Server; Configuration Screens - TRENDnet TE100-P1U User Manual

Connecting to the Print Server

1. Start your Web Browser.
2. In the Address box, enter HTTP:// followed by the IP Address of the Print Server.
e.g.
http://192.168.0.21
3. You will then be prompted for the password. If no password has been set, just press E
4. Use the menu bar on the top of the screen to move about. Remember to save each screen
before changing to a different screen.

Configuration Screens

Depending on your models, the Web-based interface may look different to the images shown in
the User's Manual.
The functions have not changed, and the description of each setting is correct. Only the
appearances are different.
AppleTalk
AppleTalk zone
Printer Object
Type
Communication
Protocol
Figure 29: AppleTalk Screen
This determines which Apple systems can gain access to this printer.
These are text fields, used to describe the printer driver used for each
port. The Print Server is designed to work with LaserWriter (or
100% compatible) printers.
Sets whether the port uses ASCII or Binary Communication
Protocol.. The default is Binary.
.
NTER
Page 35