Windows With Server-Based Print Queues - TRENDnet TE100-P1U User Manual

Capture Settings - Windows 2000/XP
1. Login as Administrator.
2. Open the command prompt window.
3. Enter the following command to capture data from LPT1 (parallel port 1)
net use lpt1 \\server_name\printer_name /persistent:yes
Where
\\server_name\ printer_name
e.g.
net use lpt1 \\SC3000014\P1 /persistent:yes
4. Close the command prompt window.
To terminate this capture, use the following command at the command prompt:
net use lpt1 /delete

Windows with Server-based Print Queues

With a Server-based Print Queue, the Print Server is installed on an existing Network Server
(Windows, Unix, or NetWare), rather than on your PC. If your Network Administrator uses
this system, each Windows client must be set up as follows:
1. Open your Printers folder, and start the Add Printer Wizard.
2. When prompted, select Network Printer.
3. When prompted for Network Path or Queue Name:
•
On Windows 98/ME, click the Browse button
•
On Windows 2000/XP, leave the field blank and click Next
is replaced with the actual path to your printer.
Figure 18: Network Path - Windows 98/ME
Page 20