Advertisement

0203079en
005
10.2010
Vibratory plate
BPU
2540A, 3050A, 3750Ats
Operator´s Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BPU 3750Ats and is the answer not in the manual?

Questions and answers

Summarization of Contents

Safety Guidelines
2.1 Principle of Safe Operation
Covers machine's state of the art, proper use, and structural modifications for safe operation.
2.2 Qualification of Operating Personnel
Defines requirements for personnel operating the machine, including age, physical fitness, and training.
2.3 Protective Gear
Details essential work clothing and personal protective equipment for injury prevention.
2.4 Transport Safety
Covers safe procedures for transporting the machine, including switching off and securing.
Technical Data
Machine Specifications
Provides key specifications for the machine, including dimensions, weight, area capacity, and vibration values.
Drive Motor Specifications
Details specifications for the drive motor, such as manufacturer, type, displacement, and fuel consumption.
Exciter and Hydraulic Data
Lists technical details for the exciter and hydraulic system, including vibrations, forces, and oil specifications.
Transport and Compaction Recommendations
Transport to Work Site
Provides conditions and instructions for safely transporting the vibratory plate.
Recommendations on Compaction
Offers advice on ground conditions, compaction depth, and compacting on slopes.
Operation
Engine Checks Before Starting
Details checks for oil level, air cleaner, and fuel before starting the engine.
Starting the Engine
Provides step-by-step instructions for starting the machine's engine.
Engine Operation
Covers warming up the engine, oil alert system, and controlling forward/reverse motion.
Stopping the Engine
Explains the procedure for safely stopping the machine's engine.
Maintenance
Maintenance Schedule
Outlines the schedule for routine maintenance jobs and their intervals for different parts.
Engine Oil Maintenance
Details procedures for checking and changing the engine oil.
Hydraulic Control and Exciter Maintenance
Covers checking and changing oil for hydraulic control and exciter, and V-belt service.
Fuel System and Ignition Maintenance
Describes cleaning the fuel strainer, servicing the spark plug, and adjusting the carburetor.
Air Filter Service
Details the procedure for cleaning and maintaining the air filter element.
Troubleshooting Faults
Common Operational Faults and Remedies
Lists common problems like low speed, no advance, loss of hydraulic oil, and engine not starting, with causes and remedies.
Glossary
Use of Oxygenated Fuels
Provides guidance on using oxygenated fuels and approved percentages of oxygenates.

Table of Contents

Save PDF