Ending A Call - Cisco 7942G Phone Manual

If you want to...
Answer a priority call (SCCP
phones only)
Answer a call on your cellular
phone or other remote
destination
Tip
If parties on a call hear a beep tone, the call might be monitored or recorded. Ask your system
administrator for more information.

Ending a Call

To end a call, hang up. Here are some more details.
If you want to...
Hang up while using the handset
Hang up while using the headset
Hang up while using the speakerphone Press
Hang up one call but preserve another
call on the same line
Cisco Unified IP Phone 7962G and 7942G Phone Guide for Cisco Unified Communications Manager 6.1(3) (SCCP and SIP)
Then...
Hang up the current call and press
Answer.
Set up Mobile Connect and answer
your phone.
When you enable Mobile Connect:
• Your desktop and remote
destinations receive calls
simultaneously.
• When you answer the call on your
desktop phone, the remote
destinations stop ringing, are
disconnected, and display a
missed call message.
• When you answer the call on one
remote destination, the other
remote destinations stop ringing,
are disconnected, and a missed
call message is shown on the other
remote destinations.
Then...
Return the handset to its cradle. Or press EndCall.
Press . If you want to keep headset mode activate, press
EndCall.
or EndCall.
Press EndCall. If necessary, remove the call from hold first.
Basic Call Handling
For more information, see...
Prioritizing Critical Calls,
page 43
Using Cisco Extension
Mobility, page 45