Using Do Not Disturb - Cisco 7942G Phone Manual

If you want to...
Set up Call Forward All on
your primary line
Cancel Call Forward All on
your primary line
Verify that Call Forward All is
enabled on your primary line
Set up or cancel call
forwarding remotely, or for a
non-primary line
Tips
• Enter the call forward target number exactly as you would dial it from your phone. For example,
enter an access code or the area code, if necessary.
• You can forward your calls to a traditional analog phone or to another IP phone, although your
system administrator might restrict the call forwarding feature to numbers within your company.
• Call forwarding is phone line specific. If a call reaches you on a line where call forwarding is not
enabled, the call will ring as usual.
• Your system administrator can enable a call forward override feature that allows the person
receiving your forwarded calls to reach you. With override enabled, a call placed from the target
phone to your phone is not forwarded, but rings through.

Using Do Not Disturb

You can use Do Not Disturb (DND) to block incoming calls from ringing on your phone. Your system
administrator enables DND for your phone.
When DND and Call Forward are both enabled on your phone, calls are forwarded and the caller does
not hear a busy tone.
Your intercom lines still ring when DND is active.
Cisco Unified IP Phone 7962G and 7942G Phone Guide for Cisco Unified Communications Manager 6.1(3) (SCCP and SIP)
Then...
Press CFwdALL or Forward All and enter a target phone number.
Press CFwdALL or Forward All.
Look for:
• The call forward icon above the primary phone number:
• The call forwarding target number in the status line.
1. Log in to your User Options web pages. (See
User Options Web Pages, page
2. Access your call forwarding settings (See
Settings on the Web, page
Note When call forwarding is enabled for any line other than the
primary line, your phone does not provide you with any
confirmation that calls are being forwarded. Instead, you must
confirm your settings in the User Options web pages.
Accessing Your
60.)
Controlling Line
68.)
Basic Call Handling
.