Table of Contents
Advertisement
Example of running a program
In this example, the program recorded in the earlier example of
recording a program is run:
U
Press the MENU soft key to display the menu soft key titles at the
bottom of the screen.
U
Press the PROG soft key to display the Programs screen.
U
Highlight the desired program number using the ARROW CURSOR
keys.
Menu key is pressed to show menu soft
key titles
U
Press the RUN soft key to initiate the program play back and display
the DRO screen.
U
Press the view soft key to display the targeting graphic to assist
rough part positioning.
U
Follow the program prompting messages to perform all
measurement and other inspection activities. When all the program
steps have been completed, the program will stop and the DRO
screen will be displayed.
The program begins running
ND 1200 QUADRA-CHEK
PROG soft key is pressed to show
Programs screen
The targeting view is used for rough part
positioning
The desired program is selected
The program steps are complete and the
DRO screen is displayed
61
Advertisement
Table of Contents
