Table of Contents
Advertisement
EXTRA menu
Annot
DMS/DD
MCS
MinMax
Preset
Preset!
Prt RS
Run
Send 2
Send 3
Send 4
Send D
26
EXTRA functions
Press the EXTRA soft key
to display the EXTRA pop-
up menu. The EXTRA
menu is used perform
many measurement and
data transmission
functions. Highlight a
function and then press the
ENTER key. EXTRA menu
functions include:
Toggles between forward
and backward annotation.
Toggles between the
display of degrees,
minutes, seconds and
decimal degrees.
Clears datums and re-
establishes machine
coordinates.
Collects and stores
minimum and maximum
values until the FINISH key
is pressed.
Sets the position of one or
more axes to specified
values.
Recalls the last preset
position.
Sends current data to the
RS-232 serial port.
Runs the last program.
Sends current X, Y data to a
printer, USB drive or
computer.
Sends current X, Y, Z data
to a printer, USB drive or
computer.
Sends current X, Y, Z, Q
data to a printer, USB drive
or computer.
Sends current diameter to
a printer, USB drive or
computer.
1 Operation
Advertisement
Table of Contents
