Backing Up Programs - HEIDENHAIN ND 1200 - V2.16 Operating Instructions Manual

Backing up programs

Programs can be backed up prior to editing or deleting them by saving
them with the ND 1200 settings file.
Backup and restore procedures should only be performed
by supervisors and other technically qualified personnel.
Program files are included with ND 1200 settings files.
Settings files often include error correction calibration data
and care must be taken to avoid using obsolete or
outdated files. More details regarding saving and loading
settings files are provided in Chapter 2: Installation and
Specifications.
To backup a program and ND 1200 settings files:
U Plug an empty USB flash drive into the USB port.
U
Press the MENU soft key to display the menu soft key titles at the
bottom of the screen.
U
Press the SETUP soft key to display the Setup screen menu.
U
Use the ARROW CURSOR keys to highlight the Supervisor screen
and then highlight the Password field.
U
Enter the supervisor password.
U Press the SAVE soft key to backup the program and ND 1200
settings files on the USB flash drive.
The MENU key is pressed to show soft
key titles
ND 1200 QUADRA-CHEK
The SETUP soft key is pressed and the
setup menu is displayed
The password is entered and the
program and ND 1200 settings can be
saved
71