Table Of Contents - Lexicon RV8 V1.0 - SERIAL COMMUNICATIONS PROTOCOL DEFINITION REV 1-7 Manual

Lexicon, Inc.
RV-8 Serial Communications Protocol
1 Documents
2 Definitions
2.1 Protocol Version Cross-reference
3 Abbreviations
4 General Description
5 Physical Layer
DB-9 RS232 Connector
5.2 Serial Port Driver
5.3 Errors
5.4 RV8 Receive Buffer
5.5 RV8 Hardware Verification
6 Data Link Layer
6.1 Errors
7 Application Layer
7.1 RV8 Asynchronous Notification Packets
7.1.1 Wakeup Notification
7.1.2 Sleep Notification
7.1.3 Front Panel Display
7.1.4 RV8 Parameter Notification by Id (RV8)
7.2 Acknowledgment Packets
7.2.1 Acknowledge (RV8, MC-12, MC-1)
7.2.2 No Acknowledge (RV8, MC-12, MC-1)
7.3 Host Initiated Command Packets
7.3.1 Reset Unit (RV8, MC-12, MC-1)
7.3.2 Get Custom Name
7.3.3 Get ARRAY Definition(RV8)
7.3.4 Get ARRAYITEM(RV8)
7.3.5 Set ARRAYITEM(RV8)
7.3.6 Set Custom Name
7.3.7 Host Wakeup
7.3.8 Host Sleep
7.3.9 Get Communication Configuration
7.3.10 Set Communication Configuration
7.3.11 Set Mute
7.3.12 Send Display String Command
7.3.13 Get Parameter Definition by Id
7.3.14 Set Parameter Value by Id
7.3.15 Set Parameter Value by Id, No Run
7.3.16 Get Unit Configuration
7.3.17 Send IR Command
7.3.18 Get Parameter Value by Id
7.3.19 Set Parameter Notification by Id
7.3.20 Parameter Get Value String by Id
7.3.21 Clear All Parameter Notifications
7.3.22 Get System Status
7.3.23 Get Record Status
7.3.24 Set System Volume
7.3.25 Set Main Balance
7.3.26 Set Front/Back Balance
© 2004 Lexicon, Inc. All rights reserved.
Printed on: 01/18/05
5
5
5
5
5
6
6
6
6
7
7
7
7
8
8
8
8
9
9
11
11
11
11
11
12
12
13
14
14
15
15
16
16
17
18
18
21
22
23
26
26
27
28
29
29
31
31
32
32
3 of 74