Table of Contents
Advertisement
Lexicon, Inc.
RV-8 Serial Communications Protocol
1.1 Examples:
The following examples show the byte's transmitted for the Send RV8 IR Commands . They are shown as
they should be transmitted from left to right.
1.1.1 Send RV-8 IR Command Example
SOP
DLL DC
CMD
F1
04
39
This example shows how to transmit the IR command for "
the GAME input for the Main Zone. The bytes are transmitted from left to right and they
are defined as:
Byte 0: Start of Packet(F1 hex)
Byte 1: Data Link Layer(DLL) Data Count(DC); for an IR command this would be 4 bytes to
follow
Byte 2: The Application Layer Command, in this case it is 39 hex indicating this is an IR
command packet.
Byte 3: The Application Layer Data Count(DC); for this packet it is 1 data byte to follow.
Byte 4: The Application Command Data: This IR Command Packet is transmitting Key Code
"
MAIN_GAME
with other IR key codes as found in
Byte 5: End of Packet (F2 hex)
1.2 RV-8 V1.00 Parameter ID List
The following table is for V1.00 reference only. These Parameter Id Values will change with S/W and
Protocol version changes. The RV-8 can always be queried for the correct Parameter Id numbers and
Parameter Definition Packets.
ParamId
ParamId
ParamName
(dec)
(hex)
0
0x000
None
1
0x001
PARAM.INPUTS
2
0x002
PARAM.INPUTS.OFF
3
0x003
PARAM.INPUTS.OFF.INPNAME
4
0x004
PARAM.INPUTS.OFF.DIGIN
5
0x005
PARAM.INPUTS.OFF.ANLGIN
6
0x006
PARAM.INPUTS.OFF.ANLGTRIM
7
0x007
PARAM.INPUTS.OFF.TRIMMODE
8
0x008
PARAM.INPUTS.OFF.VIDEOIN
9
0x009
PARAM.INPUTS.OFF.CH2EFFCT
10
0x00A
PARAM.INPUTS.OFF.DDEFFCT
11
0x00B
PARAM.INPUTS.OFF.DTSEFFCT
12
0x00C
PARAM.INPUTS.OFF.MSRCMODE
13
0x00D
PARAM.INPUTS.OFF.Z2SRCMODE
14
0x00E
PARAM.INPUTS.OFF.Z3SRCMODE
© 2004 Lexicon, Inc. All rights reserved.
AppDC DATA0
EOP
IR Key
Code
01
28
"(28 hex). To transmit other IR Key Codes the user would replace this byte
Appendix D RV-8 IR
F2
". This example command will select
MAIN_GAME
Codes.
Printed on: 01/18/05
45 of 74
Advertisement
Table of Contents
