Importing Certificates Into The Sa8220 - HP P4522A - Traffic Management Server Sa8220 User Manual

A P P E N D I X B
Importing
Certificates
into the
SA8220
NOTE: Do not interrupt
the import process. If you
do interrupt the process,
delete the certificate and
start again.
The recommended method for importing an existing certificate is to
copy the certificate (a block of ASCII text) from your certificate
server console window, then paste it into the SA8220's console
window when prompted.
For more details about copying and pasting, please see "Copying and
Pasting Keys and Certificates" in this appendix.
To paste in a certificate:
1. Type the import command and press <Enter>.
The CLI prompts you to paste in the certificate.
2. When finished, type three periods ("...") on a separate line, then
press <Enter>.
3. When the procedure is complete, you can type info at the
prompt to verify the certificate's transfer to the SA8220.
An alternative method for importing an existing certificate is to ftp
the certificate, as shown below:
config policygroup <name> service <name> key
certificate import [<url> user <username>
password <password>]
where url is a valid URL identifying the certificate file to download.
(It must be in the form ftp://<host>/<path_name> ), user is
the username, and password is the password.
Obtaining Keys and Certificates
259