Run A Web Service On The Loopback Interface Using Iis 3.0 - HP P4522A - Traffic Management Server Sa8220 User Manual

A P P E N D I X D
NOTE: If you cannot
find Microsoft Internet
Server (Common), you do
not have IIS running on
your server. Install IIS
3.0 and start this
procedure again.
Run a Web Service on the Loopback Interface
Using IIS 3.0
1. From the Start menu, click Programs and then Microsoft
Internet Server (Common) to run the Internet Service Manager.
2. After the Microsoft Internet Service Manager console appears,
double-click the WWW service.
The WWW Service Properties for < machine-name > dialog
box appears, where < machine-name > is the name of your
system.
3. In the TCP Port field, type the port number of the OPR service
on the SA8220.
4. Select the Directories tab and click Add.
The Directory Properties appears.
5. Browse and click to select the home directory for the server.
6. Click the Home Directory check box.
7. Click the Virtual Server check box, and in the text field provided
type the VIP that was aliased on the loopback (please see "Set the
Loopback" in Appendix F).
8. Click Ok.
9. Add the server to the SA8220.
Configure OPR for Windows* NT*
295