Security Commands - HP P4522A - Traffic Management Server Sa8220 User Manual

C H A P T E R 5
Security
Commands
config sys software install
key>} {user <user name>} {password
<password>} passive <enable | disable>}
config sys software ms-software info <index>
config sys software ms-software enable <index>
config sys software ms-software delete <index>
config sys software ms-software install
These commands are described later in this chapter.
config sys security custom
config sys security custom access-control
[enable | disable]
config sys security custom acl add ip
<xxx.xxx.xxx.xxx>
config sys security custom acl add netmask
<xxx.xxx.xxx.xxx/xx>
config sys security custom acl delete ip
<xxx.xxx.xxx.xxx>
config sys security custom acl delete netmask
<xxx.xxx.xxx.xxx/xx>
config sys security custom acl info
config sys security custom forwarding [enable |
disable]
config sys security custom gui [enable |
disable]
config sys security custom info
config sys security custom ms-agent [enable |
disable]
config sys security custom snmp [enable |
disable]
config sys security custom ssh [enable |
disable]
config sys security custom telnet [enable |
disable]
config sys security info
config sys security mode <open | closed |
custom>

Security Commands

<url> {key <license
141