HP P4522A - Traffic Management Server Sa8220 User Manual page 266

A P P E N D I X A
254
HP Traffic Director Server Appliances User Guide
3. With custom mode access, control lists can be used to further
enhance administration security by restricting management
functionality to either your IP or subnet. Type the commands as
shown below:
config sys security custom access-control
enabled
config sys security custom acl add ip <ip
address>
For a subnet entirely under your control, type the following
command:
config sys security custom acl add netmask <ip
address>/<mask length>
4. If you want to use SNMP, reads and traps should be restricted to
the specific IP's of logging hosts or administration machines.
Type the following commands for this purpose. The system must
be in custom mode and SNMP access must be enabled.
config sys snmp community delete public ip any
config sys snmp community delete private ip any
config sys snmp community create <community
string> ip <ip address> rights [ro|rw]
5. Always remember to save your configuration by typing the save
<filename> command.