Snmp Tab; Snmp Agent - HP P4522A - Traffic Management Server Sa8220 User Manual
Hp traffic director server appliances sa7200/sa7220 and 8200/sa8220 - user guide
Hide thumbs
Also See for P4522A - Traffic Management Server Sa8220:
- Warranty and support information (12 pages) ,
- Getting started manual (23 pages)
Table of Contents
Advertisement
C H A P T E R 4
SNMP Tab
NOTE: Ensure that the
SA8220's IP Filtering
security mechanism
allows IP access to
SNMP, otherwise SNMP
requests will not pass
through the filter.
The SNMP tab (shown below) includes controls for the SA8220's
Simple Network Management Protocol (SNMP) agent.
Administration Screen's SNMP Tab
SNMP Agent
The SNMP agent allows network management applications to
monitor and retrieve the SA8220's status and statistics via SNMP.
The SNMP Agent Start check box allows you to enable or disable the
SA8220's SNMP agent. The default is Enabled.
• The SNMP Port: field allows you to specify the port on which the
SA8220 receives SNMP requests. Allowable port numbers are
any unused ports 5020 through 65535 or 161 (the default).
• Use the Trap Port: field to specify the port on which the SA8220
sends SNMP traps. Allowable port numbers are any unused ports
5020 through 65535, or 162 (the default).
• System Location: corresponds to the MIB variable sysLocation
in MIB-II. System Location (sysLocation) is the physical
location of this SA8220. By default, sysLocation is NULL.
Administration Screen
101
Advertisement
Table of Contents
Troubleshooting
