HP P4522A - Traffic Management Server Sa8220 User Manual page 70

C H A P T E R 3
static_routes
version
58
HP Traffic Director Server Appliances User Guide
Deletes and adds any number of static IP routes. Shows the current
static IP routes (if any) when the function is entered. You are
prompted for the destination and gateway IP addresses. The info
command will show any static IP routes that are known to the Boot
Monitor, and factory_reset will remove all static IP routes as
part of its cleanup.
Example:
monitor> static_routes
Static Route information.
Enter Static route (1) dest IP(- to del, q to
quit): --->10.7.16.5
Enter Static route (1) gate IP(- to del, q to
quit): --->10.8.15.40
Enter Static route (2) dest IP(- to del, q to
quit): --->10.7.18.50
Enter Static route (2) gate IP(- to del, q to
quit): --->10.8.15.40
Enter Static route (3) dest IP(- to del, q to
quit): --->q
{2} Static Route(s).
Displays software version information.
Example:
version
monitor>
Product:
Version:
Patch Level:
Build:
HP SA7220
2.4
0.1
40