HP P4522A - Traffic Management Server Sa8220 User Manual page 64

C H A P T E R 3
host
interface
52
Sets the SA8220's host name.
Example:
monitor>
Enter the hostname you would like to assign to
the Network NIC: --->
info Displays the current boot configuration.
Configures Ethernet port parameters. Compatibility with some older
switches, hubs, or routers, may require that you manually specify the
Ethernet speed and duplex mode of the SA8220's network interface
card.
Single NIC configuration example:
Auto configure the network NIC speed and duplex
(yes,no)? [yes] --->no
1 - 100BaseTx
2 - 10BaseTx
Select Media Type (1 or 2): [1] --->
Use Full Duplex? [n] --->
Dual NIC configuration example:
Auto configure the Network side NIC speed and
duplex (yes,no)? [yes] --->
Auto configure the Server side NIC speed and
duplex (yes,no)? [yes] --->
ip
Specifies the SA8220's IP address.
Example:
monitor>
Enter the IP address for the Network side NIC
[10.6.3.21] --->
Enter the IP address for the Server side NIC
[10.6.5.21] --->
HP Traffic Director Server Appliances User Guide
host
ip
CSLab7k
2
n