3. Connect an Ethernet cable
Connect an Ethernet cable to the network
cable connector located on DCS-1000W's rear
panel and attach it to the network.
4. Attach the external power supply
Attach the external power supply to the DC
power input connector located on DCS-
1000W's rear panel and is labeled DC 5V
and connect it to your local power supply.
Note:
Confirm power source is supplied from the
LED indicators la bel Power on DCS-1000W
is illuminated.
Connecting the DCS-1000W to the Camera Stand
DCS-1000W comes with a camera stand
with a swivel ball screw head that can be
attached to DCS-1000W's bottom bracket
cavity. Attach the camera stand to DCS-
1000W and station it for your application.
There are three holes located in the base
of the camera stand allowing the DCS-
1000W to be mounted on the ceiling or
any wall securely.
10