System Administration - Trigger - D-Link DCS-1000W Manual

System Administration – Trigger
The Trigger menu contains commands for the I/O Trigger connectors
providing the physical interface for 2 digital outputs and 2 digital inputs that
are used for connecting a diversity of external alarm devic es to the DCS-
1000W such as IR-Sensor and alarm relay devices.
Click on "Trigger" in the system administration menu bar and the Trigger
screen will appear as illustrated below:
The default setting for the I/O Trigger functions is "disabled" You must
enable the I/O Trigger first before the Triggers will perform.
There are two options to select from the Trigger screen I/O Input 1 Trigger
and I/O Input 2 Trigger.
I/O Input 1 Trigger:
Select "Send e-mail attached with image" and enter the relevant information
such as the SMTP Server Address, Sender e-mail Address, Receiver e-mail
Address, Sending Interval and Sending Times.
SMTP (Simple Mail Transfer Protocol) is a protocol for sending e-
mail messages between servers you need to input the mail server
26
Click on "Home" to
return to Home Screen