Download Print this page

D-Link DCS-1110 Quick Install Manual

Poe internet camera
Hide thumbs

Advertisement

Quick Links

Advertisement

loading

  Also See for D-Link DCS-1110

  Related Manuals for D-Link DCS-1110

  Summary of Contents for D-Link DCS-1110

  • Page 2: System Requirements

    Package Contents DCS-1110 10/100 TX PoE Internet Camera Camera Stand CAT5 Ethernet Cable If any of the above items are missing, please contact your reseller. D-Link DCS-1110 Quick Install Guide CD-ROM with Manual and Installation Wizard 5V 2.5A AC Power Adapter...
  • Page 3: Hardware Overview

    Hardware Overview Link LED The Link LED is positioned on the right side of the DCS-1110’s lens. It is located to the right of the Power LED. Steady orange confirms a good connection to the LAN. Depending on the data traffic, the LED will begin to flash to indicate that the DCS-1110 is receiving/...
  • Page 4 Release the reset button and the Power LED will begin to flash indicating that the DCS-1110’s settings are reverting back to the factory settings. The IP address will also return to the default setting with DHCP selected.
  • Page 5: Hardware Installation

    Internet Camera’s back panel and attach it to the network. If you connect this camera directly to a PC, the DCS-1110 has an MDI/X port that will allow you to use either a straight through (included) or cross-over cable.
  • Page 6: Software Installation

    Software Installation Software Installation Insert the DCS-1110 CD into the CD-ROM drive. Click on Installation Wizard Click Next D-Link DCS-1110 Quick Install Guide...
  • Page 7 Software Installation Click Yes Click Next D-Link DCS-1110 Quick Install Guide...
  • Page 8 Software Installation Click Finish Now you should install ffdshow, this will install the proper codec that will allow you to playback recorded video taken by the DCS-1110. Click OK Click Next D-Link DCS-1110 Quick Install Guide...
  • Page 9 Software Installation Click I Agree Click Next D-Link DCS-1110 Quick Install Guide...
  • Page 10 Software Installation Click Next Click Finish D-Link DCS-1110 Quick Install Guide...
  • Page 11 Configuration Configuring Your Camera with the Setup Wizard D-Link DCS-1110 Quick Install Guide...
  • Page 12 Configuration Click Next Click Restart D-Link DCS-1110 Quick Install Guide...
  • Page 13 After you click the Link button, the Installation Wizard will automatically open your Web browser to the IP address of the DCS-1110 and prompt you for a user name and password. Enter “admin” into both fields. If you changed the user name and password in the setup wizard, enter the new values and click Apply.
  • Page 14 Web browser. In this example the IP address of the camera is http://192.168.0.20. Your DCS-1110 may have a different IP Address. The installation and configuration of the DCS-1110 Internet Camera is now complete. D-Link DCS-1110 Quick Install Guide...
  • Page 15 Notes Notes D-Link DCS-1110 Quick Install Guide...
  • Page 16: Technical Support

    Copyright ©2005 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link, the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries in the United States and other countries. Other trademarks are the property of their respective owners. Maximum wireless signal rate based on IEEE Standard 802.11g specifications. Actual data throughput will vary.