How To Take A Snap-Shot Of A Camera; Snap Shot Camera; How To Adjust The Property Setting; Property Setting - D-Link DCS-1000W Manual

2.4ghz wireless internet camera

Hide thumbs Also See for DCS-1000W:

Table of Contents

How to take a Snap-Shot of a Camera

To snap shot a camera you must highlight the camera you wish to snap shot

from the list view format. From the menu bar select "Camera" > "Snap

shot". A Save Image dialog box will appear for you to save the snap shot

picture.

A second alternative is from the viewing mode either 1, 4, 9, 16 cameras click

on the icon located on the upper left corner of the screen and a case sensitive

menu will appear and select the "Snap shot" icon. A Save Image dialog box

will appear for you to save the snap shot picture.

Note:

Alternatively you can click the Snap shot icon

as illustrated or use the hot

key "F5 ".

"Property" is initiated by selecting "Camera" > "Property" and a dialog

box will appear allowing settings of Web Configuration and upgrade firmware

(Please refer to the appendix for detailed information). The Camera Property

dialog box will appear for you to select the desired options from the tab

selections to Configure the camera as shown below.

Table of Contents