D-Link DCS-1000W Manual page 69

2.4ghz wireless internet camera

Hide thumbs Also See for DCS-1000W:

Table of Contents

I/O Schematic Diagram

When connecting a device to the Input connector, the device must be a

passive component without voltage and electrical current.

When connecting other devices through the Output connector, please

make sure the maximum current of DC 5V, 100mA is strictly observed.

Any failure of the above two points might cause serious damage to the

camera.

Note:

Through the Web Configuration in the Trigger section, you must first enable

the trigger function. Please refer to the Web Configuration section for detailed

information.

Warning

Table of Contents