Location**- The location of DCS-1000W will be displayed when the
Location field is entered in the Web Configuration settings under "System".
Note:
Please refer to the appendix on how to install ActiveX.
1. Install to the Web Server
2. Install to your Lo cal PC
In the View Image – ActiveX Mode you are allowed two output trigger
options. Just click on the desired selection "ON" or "OFF" to utilize the
options for each of the output triggers (Output 1 trigger or Output 2 trigger).
Note 1:
Output trigger will send a 5V signal to the device connected to the DCS-
1000W. A maximum of two devices is permitted to connect to DCS-1000W to
utilize the output trigger function. Please refer to appendix for detailed
information.
Note 2:
The Administrator has the authority to allow user's to set the output trigger
functions through the setting in the "Users" of System Administration menu
bar.
30