Hardware Installation Connect an Ethernet Cable Connect an Ethernet cable to the network cable connector located on DCS-1000’s rear panel and attach it to the network. We suggest using the Ethernet port to configure the DCS -1000 and then install the camera in its correct location.
Windows Me, 98 and 95. Please refer to the documentation for your specific operating instructions for details on changing the IP address of your computer so that you can access and configure the DCS-1000. If your computer already uses an IP address of 192.168.0.x, please skip to the next section.
Network Icon Under the configuration tab, find and double click TCP/IP for the network adapter used to configure the DCS-1000. Please make note of the IP Address settings so that you can change these settings back after the cofniguration of the...
Using your favorite web browser, type “http://192.168.0.20” in the address box (the default IP address is 192.168.0.20) Press Enter. The Welcome screen of the DCS-1000 will appear. Click “System Administration” to access and change system settings. In the “Computer Name ” field, type a name of your choosing that relates to...
The Default Gateway is the IP address of your Router. This settings allows the DCS-1000 to be seen from the public Internet. Next, type in the “DNS IP Address” of your Domain Name System servers into the cooresponding fields.
IP address that you assigned to the camera from the previous section. Press Enter. The Welcome screen of the DCS-1000 will appear. Click on “View Image – Java Mode ” from the Home screen to access the streaming video.
24 Hours a Day, 7 Days a Week D-Link Technical Support over the Internet: support.dlink.com firstname.lastname@example.org If you are a customer residing outside of the United States, please refer to the list of D-Link locations that is included in the User’s Manual.
Notes: Building Networks for People http://www.dlink.com...